Kessel SonicControl Instructions D'utilisation Et De Maintenance page 47

4.1 External signal generator
The external signal generator (order no. 20162) for transmitting
the acoustic warning to other rooms can be connected if required.
(see connection diagram).
4.2 Shortening the sensor cables
The sensor cables can be shortened if required. We only recom-
mend subsequently tin-plating the wire ends. When cable end
sleeves are used, care must be taken that the connection terminals
are designed for a max. cross-section of 2.5 mm
tion must not be exceeded.
395-016
Electrical connection
4.3 Potential-free switch contact
Fasten the potential-free contact to the connection terminals.
. This crosssec-
2
47
12
2020/01