Kessel SonicControl Instructions D'utilisation Et De Maintenance page 49

Possibilities of professional cable
extension on site (IP 68)
The SonicControl cable is 10 metres long.
On site, this cable can be extended by a
qualified electrician up to max. 60 metres
without any change in cross-section being
necessary.
SonicControl probe extension to max. 60
metres 0,75 mm
2
Note:
The regulations set out by the directive
VDE 0100 must be heeded. The switch unit
must not be installed in potentially explosi-
ve areas. The 10 m cable can be extended
on site to up to 60 m. If the cable is routed
in a cable channel with cables from other
frequency-controlled units, a shielded cable
has to be used
395-016
Electrical connection
Fig.1
Fig.2
Fig.3
Fig.4
49
Fig. 1:
Crimp cable extension with butt joint
Fig. 2: Shell is placed around the cable,
both shell ends are sealed
Fig. 3: Cast the shell with prepared cas-
ting resin
Fig. 4: Final state with sealing plug
Individual parts on request
2020/01