Kessel SonicControl Instructions D'utilisation Et De Maintenance page 59

8.3 Information menu
Systeminfo Information
Servicing
Settings
395-016
Switch unit
8.3.1 Operating hours
Display of all system operating times.
Operating hours
8.3.2 Log book
Chronological display of incidents and faults (see also chapter 7 "Incidents and
Log book
faults / remedial measures")
All changes made to the settings are saved at this point.
Control unit type
8.3.3 Control unit type
Display of system time, standard/nominal size, language and software status.
Servicing date
8.3.4 Servicing date
Current
measured values
Display of the next necessary and last performed servicing.
Note: Data are only available if these have been stored in the "Settings" menu by
Parameters
the servicing partner.
Measured data-
8.3.5 Current measured values
memory
Pressing the OK key carries out a measurement of the current grease layer thick-
Disposal
ness.
8.3.6 Parameters
Display of all set control parameters of the system It is not possible to change the
parameters in this menu.
8.3.7 Measured data memory
Display of the last layer thickness and temperature stored (max. 400 values).
8.3.8 Disposal
Display of details of the last disposal carried out (if stored)
59 2020/01