Kessel SonicControl Instructions D'utilisation Et De Maintenance page 48

4.4 Installation / Cable Connections
The SonicControl cable may not be laid with together with any other
electrical systems / circuits. Do not lay the cable parallel with any
other cables in order to prevent an electrical interference which can
cause the SonicControl to malfunctions. The sensor itself should not
be grounded.
IMPORTANT:
All cables entering the control unit should be secured properly secured
with a tie-wrap or cable clip to prevent any danger to the unit or the
operator in the case that a cable connection comes loose. The sensor
cable should be laid separately from the control unit's power cable to
prevent interference.
395-016
Electrical connection
Fig. shows connection possibilities for the control unit
1) Power connection
2) USB connection
3) Sensor cable
48
2
1
3
2020/01