Kessel SonicControl Instructions D'utilisation Et De Maintenance page 39

3.2 Installation of sensor and sensor bracket
For grease separator up to 03/2014
1 2
For grease separator EasyClean
3
1
4
3
395-016
Installation and Assembly
3 4
2
8
7
4
2
8
7
5
6
1
4
3
1 Place the drilling template on the outside of the outlet struc-
ture and drill 2 x Ø 5,5 mm holes (top two holes!).
2 Place the drilling template on the inside of the outlet structure
and fix in place from the outside (see
3 Put the sensor and the pipe clamps together to the sensor
bracket.
4 Screw the sensor bracket to the outlet structure using a tor-
que of 1 Nm and clip the sensor in place.
5 Clip the brackets on the two lower pipe clamps, leave them
off at the top.
39
① Sensor bracket
② Hexagon screw SW 10 8 x 40
③ Countersunk head screw AW 20 5 x 30
④ Pipe clamp PP D32
⑤ Drilling template/ screw cover
⑥ Outlet structure partition
⑦ SonicControl sensor
h Red arrow marking
).
②
2020/01