Operation Description - Tecno-gaz STERILAIR PRO Manuel De L'utilisateur

ENGLISH
OPERATION DESCRIPTION
To switch the device on, move the switch at the bottom of the device on the plug side to I;
Four indicator lights indicate when each lamp is on and running.
The device is equipped with a programmer which controls automatic daily and/or weekly
switch on/off. Programming is fast and easy by means of buttons and instructions on the
display.
Controllo e simbologie sul display





General information concerning keys:
By pressing key briefly, it will: increase by 1 digit.
By pressing for more than 3 seconds, it will achieve: quicker and continuous increase
 P : Key for programming 16 switches;

Key for setting day of the week (current day and daily switching). When setting
1...7:
switching times, one can program by day or according to the following blocks:
1..5 (Monday to Friday)
6..7 (Saturday to Sunday)
 h : Time setting key (for current time and setting time)
 m : Minute setting key (for current time and setting time)
 ‐X‐>: Skip function: Pressing the Skip '‐X‐>' function key inverts the set operating
mode. For example: if the programmer is "on", it will switch off immediately and vice
versa.
 R: Reset key cancels all settings and the time of the current day
 : When selections 1, 3, 5, 7, 9, 11, 13, 15 are indicated (switch‐on points), the
symbol appears on the right side of the display.
If selections 2, 4, 6, 8, 10, 12, 14, 16 are indicated (switch‐off points), no symbol appears.
Reset





Fg.5
 1. Display with time indication and
moment of intervention.
 2. Sliding switch to set function mode:
AUTO: Switches on and off according to
set programming
I : Permanently ON
O: Permanently OFF
 3. Sliding switch to set time and
program:
To program:
RUN : Activates programming
 : Sets current time
P : Sets the program
1..6 (Monday to Saturday)
1..7 (Monday to Sunday)
12