Cub Cadet XR2-1000 Manuel D'utilisation page 41

Connect the Power Supply unit to a regular power outlet.
Now you should see the LED indication on the Base Station
blinking green (if the mower is outside, or steady green (if the
mower is inside the Base Station).
The Power Cord from the Power Supply to the
Base Station should be securely fastened to the
ground! It should never present a tripping hazard.
The Power Cord should cross ONLY over soft
surfaces. It should not cross over hard surfaces
(e.g., sidewalk, driveway) where it cannot be
securely fastened.
LED indication
41