Cub Cadet XR2-1000 Manuel D'utilisation page 75

Message Probable
Displayed Cause / Event / Meaning
E8 Too many Inactive Days and/or
Hours have been set for your lawn
"Decrease
area.
Inactive Time"
Mowing Frequency is too high for
current settings of Inactive Time.
Area setting is too high for current
settings of Inactive Time.
E9 E 9 is displayed for all other error
messages that are not listed above.
"See
Troubleshooting
in Manual
U009 Wait for the operational data to be sent via
the GSM module.
U025 Switch off before lifting.
U032 The mower is connected to
charging, but switched off.
U086 Waiting for the perimeter signal.
U087 The mowing motor has been
overloaded for too long.
Corrective
Action
Decrease the number of
Inactive Days and/or the
number of Inactive Hours.
Decrease Mowing
Frequency. See "Tell your
mower how often to mow".
Decrease area setting.
Press the Right arrow to
receive the stop reason
number and refer to our
online Help Center.
No action is required. As soon
as the operational data has
been sent, charging will start.
This may take a couple of
minutes.
It is required to switch Off the
System Switch before lifting
and carrying the mower.
Switch the System Switch to
'On' to allow charging.
Check all power cable
connections. The mower will
resume automatically.
No action required. The
mower will resume
automatically once cooled
down.
75