Cub Cadet XR2-1000 Manuel D'utilisation page 49

E. Finish Installing the Perimeter Wire
Insert the remaining pegs along the Perimeter Wire, approx.
1 m (3.3 ft) apart.
Hammer the Power cord into the ground so it's not a tripping
hazard.
F. Charge your mower
Place your mower on the Base Station and let it fully charge
before its first mow (up to 24 hours). Once it is fully charged, it
willl depart automatically according to its mowing schedule.
• The Safety Switch should be set to 'On' during charging
• Don't touch the blades
• Never mow when people, especially children or pets,
are nearby
• Make sure the lawn is clear of debris
Don't worry if your lawn looks patchy for the first few days. It
will even out after the first few mows!
TIP
49