Cub Cadet XR2-1000 Manuel D'utilisation page 24

Lay
the Wire
Lay the perimeter wire ("virtual boundary"), which
defines the working area for the mower.
Now you're ready to install the Perimeter Wire.
Let's take it step by step.
• Have the mower's package nearby.
• Be sure to cut your grass with your old mower one last time
before you start wiring. This will make inserting pegs easier and
TIPS
help ensure that the mower doesn't cut the wire.
• Hammer
• Small, flat & Phillips screwdrivers
WHAT
• Combination pliers
YOU'LL
NEED
First things first: obstacles and slopes
Before you put a single peg into the ground, take note of any
obstacles or slopes.
OBSTACLES
24
Soft Obstacles
Soft obstacles are flower beds,
ponds or small trees. They need to
be protected by creating Perimeter
Islands.