Publicité
Les langues disponibles
Les langues disponibles
Adding Sub Zones
If your lawn has additional zones and they are connected to
your main zone by a narrow passage (we call such zones
"Sub Zones"), you need to tell your mower how to get to
these zones.
To do this, press "Settings" on mower's panel for more than
3 seconds. Scroll to get to menu P022. The table below
describes how to use this menu to program a Sub Zone.
Menu
P022
50
Setting
Description
• Upon entering the menu A1/A2/A3/A4 is displayed. This
is a name of the next available Sub Zone, which you can
program. Press OK
• If the mower is currently not at the Base Station, a
message U044 ("Place the mower in the Base Station")
will be displayed. Place the mower in the Base Station
and press OK.
Add Sub-Zone
• The mower will travel along the perimeter wire to the Sub
Zone on its own.
• When the mower is at least 5 m (16 ft) inside the Sub
Zone, press STOP and select the area size of the Sub
Zone. Press OK.
• The distance to the Sub-Zone's entry point can be
updated later through menu P023
Publicité
