Cub Cadet XR2-1000 Manuel D'utilisation page 47

D. Test Wire Position
When you see the message U003
("Test wire position"), it means your
mower is ready to test the Perimeter
Wire installation.
Press OK.
The mower will start driving. Walk
alongside it as it tours the perimeter.
At the end of a successful tour, the mower will enter the Base
Station and the setup process will be completed.
If the UO52 ("Adjust wire") message is displayed and the
mower stops and drives backwards, move the wire slightly
inward and press OK to continue the wire test.
47