Mondolfo Ferro AQUILA AUDAX Manuel D'utilisation page 134

Preparing the tyre
(Fig. 32)
- Grease both the
tyre beads (A).
- Place the tyre on
the rim (B).
Positioning the
tool head (Fig.33)
- Operate control 1,
Fig. 33 to move the
tool head into the
working position.
The tool is already
in the correct posi-
tion for mounting
the tyre, unless the
type of rim has been
changed.
Mounting the bot-
tom bead (Fig.34)
- Place the bottom
bead of the tyre un-
derneath the tool
and at the same
time apply a little
pressure to the
tyre by hand while
starting to rotate
the wheel
134
A
1
B
Aquila Audax / Audax M User Manual
32
33
1
34