FRONT SECTION
Insert the front ends (2) in the open pipe ends on the mattress frame (1), both on the head rest
1.
section and the foot rest section until they click (the locking screws (3) need to be loosened first).
Carefully tighten all the locking screws (3) to the mattress frame.
2
"
"
"
"
3
"
"
"
Fasten all components with the locking screws. While doing so, the locking screws need to be
tight enough to guarantee that the front section is securely fastened.
!
Make sure that the motor cables cannot be crushed.
SIDE RAILINGS
The metal side railings are to be fastened directly to the mattress frame using large star bolts. Please
make sure that the side railings are immediately mounted on both sides (the vertical side of the railing
needs to be mounted on the front side of the head rest section (A2)). Stop rivets will need to be
mounted on the outer edge of the lying surface between which the holding blocks shall be mounted for
the side railings.
A1
A1 = Folding direction
of the side railing
A2 = Stopping
mechanism Side
railings
1 = Pull knob
Side railings
stop
1
1
1
8
1 = Mattress frame
2 = Inserts
3 = Locking screws
3
A2
Front part
Head rest surface
Stop rivets
for the side railing
holding blocks
!
EN
PRATIC
2010-11