Manual Control Without Lock Function - Vermeiren Pratic Mode D'emploi

MANUAL CONTROL WITHOUT LOCK FUNCTION

This manual control shall be used in combination with the disabling box.
The height of the bed surface, the angle of the backrest and the knee-bend angle can be adjusted with
the manual control. After use the manual control needs to be hung from the side railing.
When connecting the manual control to the disabling box please make sure that the connection plug in
the disabling box is especially secure. Proceed as follows:
The connection cable can only be removed from the disabling box after the safety ring has been
removed.
1. Back rest
2. Complete mattress frame
3. Knee-bend angle (when available)
!
Adjustments made by the patient must only be
carried out under supervision.
1. Remove the safety ring from the connection.
2. Insert the connection plug for the manual control in the
disabling box.
3. Place the safety ring in the disabling box connection so
the cable cannot be removed involuntarily.
12
EN
PRATIC
2010-11