Vermeiren Pratic Mode D'emploi page 21

2.) Measurement tests
2.1) Protective earth resistance
Actual size:
Ohm
2.2) Residual diversion current
Actual size:
A
2.3) Insulation resistance
Actual size:
MOhm
3.) Function tests
3.1) Functional check of side railings:
- locking, e.g. play in the locking device
- distances, including under load
- deformation
- wear and tear owing to load
3.2) Functional check of brakes:
- safety
- braking
- neutral
3.3) Functional check of drives:
- move through complete adjustment scope for the motors
(sounds, speed, smooth operations, etc.) - Final switch
off (e.g. current limitation, main switch)
Measure performance, first with no load, and then with the
nominal load ("SWL") to inspect for possible wear and tear
on the motors by comparing electrical current input.
Compare with the values given at the time of delivery. The
manufacturer will provide you with the limits.
Other:
n.a. Yes
n.a. Yes
n.a. Yes
n.a. Yes
n.a. Yes
n.a. Yes
n.a. Yes
n.a. Yes
20
PRATIC
2010-11
No Notes
No Notes
No Notes
No Notes
No Notes
No Notes
No Notes
No Notes
EN