Regular Inspections; Care - Vermeiren Pratic Mode D'emploi

EN

REGULAR INSPECTIONS

Regardless of inspection we recommend that you as user, should perform the following inspections:
Before use
Inspect the cables for visible signs of damage and whether all plugs are properly inserted as
indicated in the instruction manual. In the case of damage immediately disconnect the power
plug. Contact your authorized workshop for repairs.
!
Inspect the functioning of the mechanically adjustable elements (side railings, overhead boom,
foot-end). If you find that the functioning is impaired, contact your specialist dealer
immediately.
Inspect the manual control for proper functioning. Should it malfunction, please disconnect the
power plug and contact your specialist dealer.
Approximately every 8 weeks
Depending on the frequency of use, please monitor the following:
- Functioning and status of metal side railings (if applicable).
- Functioning of the sliding rail for the wooden side rail (head and foot rest, if applicable)
- The condition of the wooden parts
- Boom (fit / deformation)
- All screw, bolt and nut fasteners
Approximately every 6 months
Depending on the frequency of use, kindly check the following:
- Cleanliness
- General condition
- Airing of the mattress used
- Intervals between service checks (Service plan)
The manufacturer is not liable for damage caused by lacking or improper service checks.

CARE

Your bed requires regular care if you want it to remain visually attractive so it should be regularly
cleaned:
Wooden parts
Do not use aggressive cleaning agents and hard brushes, but only the usual commercially
available woodcare products. Do not use aggressive cleaning agents such as solvents or hard
brushes for soiled areas. Use a cloth moistened with hot water.
Metal frames
Use general all-purpose cleaners and take note of their special product information. The high
quality of the surface layer guarantees optimal protection against corrosion. If the outer layer
has been damaged by scratches or otherwise, you can protect the area by applying varnish
obtainable from your specialist dealer. Initially the chrome parts only require rubbing with a dry
cloth. Dull spots or stubborn dirt should be treated with a suitable chrome polish.
Plastic parts
Use general plastic cleaners and take note of their special product information. The motors
and the manual unit should only be cleaned with a slightly dampcloth.
!
Take note of the product information for the cleaning agents used.
!
Steam or high-pressure cleaning is forbidden !
Do not perform repairs on your own.
21
PRATIC
2010-11