Assembly; Undercarriage - Vermeiren Pratic Mode D'emploi

EN

ASSEMBLY

Please take note of the following: It offers assistance in the assembly of your nursing bed.
!
Danger of injury to persons or by objects in the assembly area!

UNDERCARRIAGE

Place the undercarriage along with the rolling castors on a flat non-porous surface. Block the four
1.
castors by activating their brakes (note also the "Steering Castor" chapter).
Insert the shears with the bearings in the c-profile and pin them securely on the other side.
2.
Secure the motor with the locking pins.
3.
HEAD / FOOT SECTIONS
Insert head rest section using the c-profile on the bearing receiving means for the undercarriage .
1.
Insert the foot section using the connection pipe to the head rest section. Connect the foot section
2.
to the undercarriage using locking pins.
Carefully fasten the screws in the connection pipes to the mattress frame.
3.
Locking pin
7
PRATIC
2010-11