Publicité
Les langues disponibles
Les langues disponibles
NOTICE
If you use the tilt up lock arm to hold the
motor in the fully tilted position for traile-
ring, the tilt up lock arm could release
resulting in damage to the motor.
When trailering your boat, never use the
tilt up lock arm to hold the motor in the
fully tilted position.
Alternative power source
NOTICE
If your outboard motor is used for auxil-
iary propulsion and it is left in the down
position when the main engine is power-
ing the boat, the outboard motor or boat
could be damaged.
Make sure that the motor is tilted out of
the water and locked whenever it is not
being used.
SHALLOW WATER POSITION
To set the shallow water position:
1. Sift into "NEUTRAL".
2. Move the tilt lock lever 1 to the release posi-
tion.
3. Slowly tilt the motor up until you hear it make
a "click" sound.
4. Slowly lower the motor. It will stop in a posi-
tion that is slightly tilted up from the normal
trim angle.
NOTE:
There are two shallow water positions. Use
whichever one is appropriate, depending on the
depth of the water.
To lower the motor back down:
1. Move the tilt lock lever 1 to the lock position.
25
Publicité
