Publicité
Les langues disponibles
Les langues disponibles
FIGURES AND DESCRIPTIONS
1 - Handles
2 - Lamp heat
3 - Self balanced arm
4 - Lever power switch
5 - Luminous intensity dial
Warning:
- In case of visible damage to the front glass or to the
external head casing, and in the event of any unusual
noises and/or vibrations, do not use the lamp and contact
authorised technical assistance personnel.
- Near ventilating grilles located in the lamp rear side there
is an air flux which - due to the inner parts heating - can
reach high temperatures.
- Avoid touching this area.
- Please ONLY use handles to move the lamp.
Before performing operation switch-off power to unit and wait for the bulb to cool off.
Periodically clean the mirror, the front glass and the filter to maintain lamp projection brightness.
Clean only when the surfaces are cool.
Use denatured ethyl alcohol to clean the glass parts.
For the filter use a neutral detergent (neutral shampoo) and hot water or la Virkosept™ solution prepared following the
product instructions.
All manuals and user guides at all-guides.com
HALOGEN BULB REPLACEMENT
(PHILIPS HALOGEN BULB 17V – 95W – G6,35)
Fig. 2 – Halogen bulb replacement
LENS CLEANING
Thoroughly dry the surfaces before switching on the lamp again.
2
1
Fig. 2 – "VENUS PLUS" Scialytic lamp
31/01/2011 - 97050183-03-GB - 50
3
4
5
Publicité
