CASTELLINI Puma Eli Mode D'emploi page 131

FIGURES AND DESCRIPTIONS
1 - Handles
2 - Lamp heat
3 - Self-balanced arm
Warning:
- In case of visible damage to the front glass or to the
external head casing, and in the event of any unusual
noises and/or vibrations, do not use the lamp and contact
authorised technical assistance personnel.
- Near ventilating grilles located in the lamp rear side there
is an air flux which - due to the inner parts heating - can
reach high temperatures.
- Avoid touching this area.
- Please ONLY use handles to move the lamp.
HALOGEN BULB REPLACEMENT
(PHILIPS HALOGEN BULB 12V – 55W – G6,35)
Before performing operation switch-off power to unit and
wait for the bulb to cool off.
LENS CLEANING
Periodically clean the mirror, the front glass and the filter to
maintain lamp projection brightness.
Clean only when the surfaces are cool.
Use denatured ethyl alcohol to clean the glass parts.
For the filter use a neutral detergent (neutral shampoo) and
hot water or la Virkosept™ solution prepared following the
product instructions.
Thoroughly dry the surfaces before switching on the
lamp again.
All manuals and user guides at all-guides.com
1
Fig. 2 – "E.Light" Scialytic Lamp
Fig. 2 – Halogen bulb replacement
31/01/2011 - 97050183-03-GB - 46
3
2