KitchenAid KFP740 Instructions Et Recettes page 11

Preparing the Food Processor for Use
Slicing and Shredding Disc Assembly
1. Place disc stem on the power shaft.
WARNING
Cut Hazard
Handle blades carefully.
Failure to do so can result in cuts.
2. Fit the disc over the metal pin on the
disc stem with the raised-blade side up.
The disc has a raised nub on the top
and grooves underneath to help align it
properly. Rotate the disc until it falls fully
onto the stem.
Mini Bowl Assembly
1. Place the mini bowl inside the work
bowl over the power shaft. Rotate the
mini bowl until it falls into place. When
properly seated in the work bowl, the
mini bowl cannot be rotated.
All manuals and user guides at all-guides.com
2. Fit the mini blade on the power shaft.
3. To remove the mini bowl after
9
WARNING
Cut Hazard
Handle blades carefully.
Failure to do so can result in cuts.
It may be necessary to rotate the blade
until it falls into place.
processing, lift the bowl using the two
finger grips located along the top edge
of the bowl.