Publicité
Les langues disponibles
Les langues disponibles
15.5
Electrical connection
Dangerous electrical voltage!
The machine may only be connected to the power supply and the associated
checks carried out by a qualified electrician or under the instruction and
supervision of a qualified electrician!
•
Check, whether the neutral connection (if existing) and the protective grounding function
properly.
•
Check, whether the supply voltage and the frequency correspond to the specifications of
the machine.
Deviation of the supply voltage and frequency!
A deviation from the value of the supply voltage of ±5 % is permissible.
A short-circuit fuse must be provided in the power supply system of the machine!
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
1.
Assembly planer fence
• Fix the planer fence (1) with washers (2)
and clamping levers (3) on the machine
2. Assembly arm planer knife cover
• Unscrew the screws (2) on the mounting
position
• Place the arm planer knife cover (1) on the
mounting position and fix it with the
screws (3) on the machine.
3. Assembly planer knife cover
• Insert planer knife cover (1) into the holder
(2) and fix it in desired position with the
fixing knop (3)
WARNING
N O TE
ASSEMBLY
HOB310ECO_230V | HOB310ECO_400V
34
Publicité
