Salicru SLC TWIN RT3 Mode D'emploi page 60

7. CONTROL PANEL WITH LCD
DISPLAY AND MENU TREE.
7.1. LCD SCREEN.
The UPS provides useful information about the UPS itself, the load
status, events, measurements and configuration.
On-Line mode
indicator
(green)
Escape
Fig. 32. LCD screen.
The following table shows the indicator statuses and their
description:
Indicator Status
On
On
On
!
On
Tab. 11. Indicator status.
60
Battery mode Bypass mode
indicator indicator indicator
(orange) (orange)
Up Down Enter On/off
button
Description
The UPS is operating normally in On-Line or
High Efficiency mode.
The UPS is operating in Battery mode.
The UPS is operating in Bypass mode.
The UPS has an active alarm or fault.
See troubleshooting for more information.
The following table shows the status of the buttons and their
description:
Button
Fault
(red)
Tab. 12. Button status.
Function Illustration
Press the button for > 100 ms. and
Power On < 1 s. to start the UPS without mains
input but with the battery connected.
With the UPS powered, press the
On
button for >1 s. to start it up.
By pressing the button > 3s, the UPS
Shutdown
will turn off.
Go up Press to scroll up the menu.
Restore main Press to restore the automatic display
screen on the main screen.
Go down Press to scroll down the menu.
Lock main Press to lock the LCD home screen on
screen the main screen.
Enter the Press to Select/Confirm the current
menu selection.
Press to exit the current menu and
Exit the current change to the main menu or the higher
menu level menu without changing the
configuration.
Press the button to temporarily silence
Silence the the buzzer. Once a new warning or fault
buzzer is activated, the buzzer will be activated
again.
SALICRU