Télécharger Imprimer la page

Salicru SLC TWIN RT3 Mode D'emploi page 50

Masquer les pouces Voir aussi pour SLC TWIN RT3:

Publicité

Les langues disponibles

Les langues disponibles

5. INSTALLATION.
Read and respect the Safety Information, described in
Chapter 2 of this document. Failure to adhere to any of the
indications set out in Chapter 2 may cause a serious or very serious
accident for those who are in direct contact with the unit or who
are in the vicinity, as well as faults in the unit and/or in the loads
connected to it.
Unless otherwise indicated, all actions, instructions, guidelines and
notes are applicable to the devices, whether or not they form part
of a parallel system.
5.1. RECEPTION, UNPACKING, CONTENT,
STORAGE, TRANSPORT AND LOCATION.
Pay attention to section 1.2.1. of the safety instructions
-EK266*08- in all matters relating to the handling, moving and
positioning of the unit.
Use the most suitable means for moving the UPS when it is still
packed, with a pallet truck or forklift.
Any handling of the unit must be done paying attention to the
weights indicated in Chapter "10. GENERAL TECHNICAL SPECIFI-
CATIONS." according to the model.
5.1.1. Reception.
Check that:
The information on the label attached to the packaging corre-
sponds to the information specified in the order. Once the UPS
is unpacked, check the above information with the information
on the unit's name plate.
If there are any discrepancies, deal with the non-conformity as
soon as possible, citing the unit's manufacturing number and
the references on the delivery note.
It has not suffered any mishap during transport.
Otherwise, follow the protocol indicated on the attached label,
located on the packaging.
5.1.2. Unpacking.
The packaging of the device consists of a cardboard box, expanded
polystyrene (EPS) or polyethylene foam (EPE) corners, polyethylene
cover and strapping, all of which are recyclable materials; so if you
do dispose of them, you should do so in accordance with current
laws. We recommend keeping the packaging in case it needs to be
used in the future.
Proceed as follows:
Remove the accessories (cables, brackets, etc. ).
Remove the device or battery module from the box with the
help, if necessary, of a second person depending on the weight
of the model or using appropriate mechanical means.
Remove the protective corners from the device and the
plastic bag.
50
Do not leave the plastic bag within the reach of children
to avoid danger of suffocation.
Inspect the device before proceeding and, in the event of
finding damage, contact the supplier or, failing that, our firm.
5.1.3. UPS content.
Check that the packaging contains the following elements:
1
3
5
7
9
Fig. 11. UPS packaging content.
2
4
6
8
10
SALICRU

Publicité

loading

Ce manuel est également adapté pour:

Slc twin rt3 b1Slc-1500-twin