Salicru SLC TWIN RT3 Mode D'emploi page 49

4.6.2.1. Integration into computer networks using
an SNMP adapter.
Large computer systems based on LANs and WANs that integrate
servers in different operating systems must provide the system
manager with ease of control and administration. This facility is
obtained through an SNMP adapter, which is universally supported
by the main software and hardware manufacturers.
Connection of the UPS to the SNMP is internal while that of the
SNMP to the computer network is made through a RJ45 10 base
connector.
The cards available are the NIMBUS MINI SNMP and the
SNMP MINI.
Fig. 8. NIMBUS card.
4.6.2.2. Modbus RS485.
Large computer systems based on LANs and WANs often require
that communication with any element that is integrated into the
computer network be made through a standard industrial protocol.
One of the most used standard industrial protocols on the market
is the MODBUS protocol.
4.6.2.3. Interface to relays.
The UPS has, as an option, an interface to relays AS-400 NIMBUS
card that provides digital signals in the form of potential-free con-
tacts, with a maximum applicable voltage and current of 240 V AC
or 30 V DC and 1A.
This communication port enables dialogue between the device
and other machines or devices through the relays supplied in the
terminal block arranged on the same card, with a single common
terminal for all of them.
From the factory, all contacts are normally open and can be
changed one by one, as indicated in the information supplied with
the optional extra.
The most common use of these types of ports is to provide the neces-
sary information to the file-closing software.
For more information, contact our
USER MANUAL
T.S.S.
or our nearest distributor.
4.6.3. WLAN Dongle
The WLAN Dongle supports wireless IoT connection via the HDMI
port located on the rear of the UPS (see to ). The IoT connection
will be facilitated thanks to the wireless connection.
Fig. 9. WLAN Dongle
4.6.4. Extendable guide kits for mounting in a rack
cabinet.
An extendable and unique guide kit is available for all device
models, valid for any kind of rack-type cabinet.
These guides allow the installation of any
possible battery modules in the case of extended backups, as if it
were a rack in its respective cabinet.
Fig. 10. Sliding guide kit..
SLC TWIN RT3 0.7÷3 kVA UNINTERRUPTIBLE POWER SUPPLY (UPS)
SLC TWIN RT3
unit and
49