EN
4.5B PERCENTAGE OF HUMIDIFICATION
Pressing the button shown on the side, you can modify the percentage of humidification.
The led under the button flashes and the display visualizes the selected humidification
value.
Pressing the button shown on the side, the value visualized by the display increases.
Pressing the button shown on the side, the value visualized by the display decreases.
NOTE: if you keep one of the buttons with the arrow pressed, after 2 seconds the value shown on the
display will change of 10 to 10.
When the display visualizes the established value, the possible actions are the following:
• Press humidification button again, in this way the led will stop flashing and the new value will be
stored when the oven will start cooking.
• Press directly the start button. In this case the oven will have the same value visualized on the display
when you press start.
• Press another button to set another parameter.
NOTE: if while the led is flashing you don't press any further button, after 10 seconds the oven will
store the value visualized by the display and the led will stop flashing.
The cooking chamber temperature set is the following:
• Convection mode with humidification adjustment (or combination) 0 - 99%
• Steam mode 99% not to be modified.
8