Diamond FVS-423 Manuel D'instructions page 10

4.5C COOKING TIME
Pressing the button shown on the side you can modify cooking time.
The led above the button flashes and the display visualizes the selected humidification
value.
Pressing the button shown on the side, the value visualized by the display increases.
Pressing the button shown on the side, the value visualized by the display decreases.
NOTE: if you keep one of the buttons with the arrow pressed, after 2 seconds the value shown on the
display will change of 10 to 10.
When the display shows the established value, the possible actions are the following:
• Press the cooking time button again, in this way the led stops flashing and the new value will be
stored when the oven will start cooking.
• Press directly the start button. In this way the oven will have the value visualized by the display when
you press start.
• Press another button to set a new parameter.
NOTE: while the led is flashing, if you don't press any other button, after 10 seconds the oven will store
the value visualized by the display and the led will stop flashing.
Cooking time adjustment set is: 1 minute-9 hours and 59 minutes.
To set a continuous functioning of the oven (unlimited time),
when the display shows 0 value, press the button here on the
side.
The display will visualize - - -.
In this case, while cooking the time display will show how long the cooking process has started (instead
of showing the missing time to end the process).
9
EN