Publicité
Les langues disponibles
Les langues disponibles
EN
8.0 SIGNALLING AND DISPLAYING MALFUNCTIONS AND BREAKDOWNS
This oven's electronic controls automatically displays any malfunctions or breakdowns.
ALL MESSAGES ARE SHOWED IN THE UPPER DISPLAY.
The defects controlled by the microprocessor can be the following:
MESSAGE
DESCRIPTION
F1A
Signals triggering of the motor over-
load protection probe.
F2A
Singles triggering of the cooking
chamber's safety thermostat.
tS1
Signals faulty temperature probe in
cooking chamber.
tS2
Signals
faulty
core
probe.
OPn
Signals door oven not closed.
HOt
Signals high temperature in control
compartment.
RESETTING
Turn the oven off if this problem per-
sists for more than an hour call in the
technical service.
Check correct rotation, without fric-
tion, of the fan and cleanliness of the
fan.
If this problem persists, call in the
technical service.
Replace the probe.
temperature
Replace the probe.
Close the door (if the signal persists,
adjust using the micro-switch on the
door).
Check that the cooling fan is operat-
ing correctly.
16
Publicité
