Malossi TC UNIT O2 CONTROLLER Mode D'emploi page 8

• Disconnect the connector and
insert, into the circuit, the O2
(21) (Fig. 12).
controller
We hope you found the above
instructions sufficiently clear.
However, if any points are not
particularly clear, please contact
us completing the special form
inserted in the "contact" section on
our Internet site (malossistore.com).
We thank you in advance for any
comments and suggestions you may
wish to send us. So goodbye from us
all at Malossi, and please accept our
compliments. Have Fun. GOOD LUCK
and ... see you next time.
The descriptions in this publication
are not binding. Malossi reserves
the right to make modifications, if it
considers them necessary, and does
not accept any responsibility for any
typographic or printing errors. This
publication replaces all previous
publications referring to the updating
matters contained therein.
Warranty
Look up warranty terms in our
website malossistore.com.
These products are reserved solely
for races in locations reserved for
those purposes and in accordance
with the regulations issued by the
competent authorities for sports
events. We decline any and all
responsibility for improper use.
8