Roger Technology CTRL Instructions Et Consignes Pour L'installateur page 68

6
Description of connections
To access the control unit. remove the barrier head.
Figure 1-2-3 shows connection diagrams.
6.1
Typical installation
4
5
1
1 Power supply
2 Photocell - Receiver F4ES/F4S
3 Photocell - Transmitter F4ES/F4S
Key selector R85/60
Keypad H85/TTD - H85/TDS
(connecting to H85/DEC - H85/DEC2)
4
H85/DEC - H85/DEC2
(connecting to control unit)
Barrier open indicator
5
Power supply 24V DC 3W max
SUGGESTIONS: with existing installations, we recommend checking the cross section of the cables and that
the cables themselves are in good condition.
68
3
2
Recommended cable
H07RN-F 3x1,5 mm double insulated cable
2
Cable 5x0,5 mm (max 20 m)
2
Cable 3x0,5 mm 2 (max 20 m)
Cable 3x0,5 mm (max 20 m)
2
Cable 2x0,5 mm (max 30 m)
2
Cable 4x0,5 mm 2 (max 20 m)
The number of conductors increases when using more
than one output contact on H85/DEC - H85/DEC2
Cable 2x0,5 mm (max 10 m)
2
3
2