Evolution FURY3-XL Instructions D'origine page 14

14
All manuals and user guides at all-guides.com
®
WARNING: Do not stare directly at the laser beam. A hazard
may exist if you deliberately stare into the beam, please
observe all safety rules as follows.
• The laser beam shall not be deliberately aimed at
personnel and shall be prevented from being directed
towards the eyes of a person.
• Always ensure the laser beam is only aimed at workpieces
without reflective surfaces, i.e. wood or rough coated
surfaces are acceptable.
• Do not change the laser module assembly with a different
type.
• Repairs to the laser module must only be conducted by
Evolution Power Tools or their authorized agent.
Body and Hand Position
1. Never place hands near the cutting area and keep hands
away from the path of blade.
2. Hold the workpiece firmly to the fence to prevent
movement toward the blade. Use a clamp if necessary but
check that it is positioned so that it does not foul the blade.
3. Before making a cut. Make a dry run with the power off so
you can see the path of the blade.
4. Keep hands in position until the ON/OFF trigger has been
released and the blade has completely stopped.
1. Releasing the saw head
a) Gently press down on the cutting handle.
b) Pull out the head latching pin and allow the head to rise to
its upper position.
NOTE: We recommend that when the machine is not in
use the cutting head is locked in its down position, and the
latching pin fully engaged in its socket.
2. Starting the Machine
Connect the machine to a mains power supply. Make sure
that the mains cable cannot become entangled in any part
of the machine and is clear of the blade and machine table.
Press the lower guard locking trigger and squeeze the On/Off
trigger switch to turn the saw ON. Release the trigger switch
to turn the saw OFF.
Always allow the motor to reach full speed before attempting
to make a cut.
3. Preparing to make a cut
Caution: NEVER pull the saw toward you during a cut. The
blade can suddenly climb up on top of the workpiece and
force itself toward you.
• Avoid awkward operations & hand positions where a sudden
slip could cause fingers or hand to move into the blade.
www.evolutionfury.com