Stryker 1020 Manuel D'utilisation page 16

OPERATING OPTIONAL TETHERED I.V. POLE
To use the tethered I.V. pole:
1. Remove the I.V. pole from the storage trough under the
litter and insert into the receptacle on the corner of the
litter frame.
2. To raise the height of the pole, turn knob (A) count-
erclockwise and pull up on the telescoping portion (B)
of the pole to raise it to the desired height.
3. Turn knob (A) clockwise to lock the telescoping portion
in place.
OPERATING OPTIONAL HEEL STIRRUPS
C
D
E
1. To use the optional heel stirrups, turn the handle (A) on the lock screw located under the litter frame and
swing the stirrup assembly into position. Tighten the handle (A) to hold the assembly in place.
2. Loosen knob (B) and pull out the extension tube (C) to the desired length. Tighten knob (B).
3. Loosen knob (D) and raise or lower the stirrup (E) to the desired height. Tighten knob (D).
Stretcher Operation
A
B
1−14
B
A