Stryker 1020 Manuel D'utilisation page 11

USING SIDERAILS
To engage siderails: Pull up siderail (A) and raise to full up position so that latch (B) engages. (See illustra-
tion).
To disengage siderails: Pull up on latch (B) and guide siderail to the full down position.
CAUTION
To avoid injury or damage to the equipment, do not allow the siderail to lower on its own.
USING PUSH HANDLES
CAUTION
The push handles should always be used when transporting patients. They were installed for this purpose
for user convenience. Avoid using other parts of the stretcher as push devices as damage may occur.
To use the push handles:
Pivot the handles up and push down until they are locked into position.
To store the push handles:
Lift the handles up and pivot them down to store in the handle rests.
Stretcher Operation
A
B
1−9