Olimpia splendid DOLCECLIMA AIR PRO Mode D'emploi Et D'entretien page 57

3.11.a Programmed switching on
a. When the appliance is in standby mode, select the operation mode, the desired temperature and ventilation
speed.
- On the control panel:
- On the remote control: - press the key "TIMER ON" to access the function and then press the key
b. Once the set time has passed, the appliance starts with the same settings (mode, temperature and ven-
tilation speed) as those before switching off.
c. Time can be set with 30 minutes steps up to 10 hours and with 60 minutes steps from 10 to 24 hours.
d. Starting the appliance or adjusting the timer setting to "0.0h" will cancel the programmed switching on
function.
3.11.b - Programmed switching off
a. When the appliance is running, set the delayed switching off time.
- On the control panel:
- On the remote control: - press the key "TIMER Off" to access the function and then press the key
b. Once the set time has passed, the appliance switches off.
c. Time can be set with 30 minutes steps up to 10 hours and with 60 minutes steps from 10 to 24 hours.
d. Switching off the appliance or adjusting the timer setting to "0.0h" will cancel the programmed switching
off function.
3.12 - OTHER FUNCTIONS
3.12.a - SILENT function
• This function can only be activated from the control panel of the appliance.
a. When the appliance is working, press key SW8 (speaker); The speaker symbol appears.
Ventilation speed automatically sets itself to minimum.
b. Press the key again to deactivate the function.
3.12.b - SLEEP function
• This function can be activated only from the remote control.
• This function is not available while the Dehumidification (DRY) and Fan Only (FAN) modes are
active.
a. When the appliance is running, press the key "SLEEP" on the remote control.
The icon appears on the control panel and on the remote control display. .
The appliance will decrease (when cooling) or increase (when heating) the set temperature by 1°C (1 or
2 F) for 30 minutes.
- press and set the switching on delay time with the keys +/-.
- To activate the function, press
the set time on the display stops flashing (the display returns to showing
the environment temperature).
The icon lights up.
"TIMER ON" once or more until the switching on delay time is set.
- Direct the remote control towards the appliance; a beep confirms the acti-
vation of the function.
on the control panel and the indicator "Timer On" on the remote
- The icon
control display light up.
- press and set the switching off delay time with the keys +/-.
- To activate the function, press
the set time on the display stops flashing (the display returns to showing
the environment temperature).
The icon lights up.
"TIMER Off" once or more until the switching off delay time is set.
- Direct the remote control towards the appliance; a beep confirms the acti-
vation of the function.
- The icon on the control panel and the indicator "Timer Off" on the remote
control display light up.
or wait approximately 5 seconds so that
or wait approximately 5 seconds so that
DOLCECLIMA AIR PRO
EN - 19