Olimpia splendid DOLCECLIMA AIR PRO Mode D'emploi Et D'entretien page 49

1 - DESCRIPTION OF THE APPLIANCE
1.1 - LIST OF THE COMPONENTS SUPPLIED (Fig.5)
The appliance is packaged singularly in a cardboard packaging.
The packaging can be transported by hand by two operators or loaded on a forklift.
Store the packaging singularly; do not stack it.
1. Flexible hose for air expulsion (cooling and
automatic mode)
2. Terminal for flexible hose machine side
3. Terminal for flexible hose for fixed / slider
installation
4. SLIDER for installation on sliding / roller window
5. Locking bracket + screws for window locking
6. Terminal for slider / window installation
7. Flange for fixed installation
1.2 -
IDENTIFICATION OF THE MAIN COMPONENTS
21. Control panel
22. Air outlet grille
23. Flap
24. IR remote control receiver
25. Wheels
26. Handel
27. Air filter grille
27a. Air filter
28. Condensation drain cap (for use as
dehumidifier)
29. Air inlet grille
A
23
24
25
22 21
26
8. Seal for SLIDER installation
9. Seal for SLIDER installation
10. Plugs for fixed installation flange
11. Remote control
12. Condensation discharge pipe
(dehumidification mode only)
13. Terminal adapter for condensation discharge pipe
14. Manual
15. Additional filters
(Fig.A)
30. Extractable air filter
31. Hole for plug housing
32. Cap for condensation emptying (in case of
transport, maintenance or excessive accu-
mulation of water)
33. Cable winder
34. Power supply cable
35. Condensation drain cap (only for version with
heat pump)
36. Air outlet grille
26
36
35
34
33
27
28
29
30
31
32
EN - 11
DOLCECLIMA AIR PRO