Time Setting Menu; Quartz Clock With Batteries - Bodet Cristalys 7 Instructions De Mise En Service Et D'utilisation

Clip the clock in place on the bracket and secure with the anti-theft locking screw provided
(see diag.2).
Remove the protective sheet from the front panel and use the anti-static cloth to clean the
clock.
Mounting on vertical bracket or ceiling bracket :
Cristalys clocks can be installed on various types of brackets (ref. 938901, 938907 and
938908). See the installation manual delivered with the bracket.
IV - TIME SETTING MENU

4.1 Quartz Clock with batteries

Adjusting the time and date :
The [SEL] button enables you to shift between the
different menus and the [+]
scroll through the setting values.
Caution : it is necessary to set up the clock in
independent synchronisation mode in order to get
a proper operation (see page 32).
To set the clock to the correct time, proceed as follows :
1. a
On installing the batteries, the 2 dots flash. Press [SEL] for 2 seconds : the hour flashes.
b
Press [+] until the required hour is shown (the display of hours takes
account of the 12 /24 hr mode, see paragraph 5 page 26).
2. a
Validate the hour by pressing [SEL] : the minutes flash.
b
Press [+] until the required minute is displayed. To synchronise your
clock to the nearest second, select the current minute +1 and as
the minute pips, validate by pressing [SEL] ;
The internal second counter is then reset to zero and starts up.
3. a
Having validated the minutes : the year flashes.
b
Press [+] until the current year is displayed.
4. a
Validate the year by pressing [SEL] : the month flashes.
9 Maintaining pressure on the [+] button for longer enables you to increase the values rapidly
(minutes, hours, days, etc).
24
9
button enables you to
Reset
Sel.