Time Setting Menu; Adjusting The Time And Date - Bodet Opalys Date Instructions De Mise En Service Et D'utilisation

IV - TIME SETTING MENU

4.1 Adjusting the time and date

The [SEL] button enables you to shift between the different menus and
the [+] button enables you to scroll through the setting values.
1
Each time [SEL] is pressed, the option that is flashing is validated.
To set the clock to the correct time, proceed as follows :
1. a On the initial powering up, the time is initialised at 00h00 01/01/2000.
Press [SEL] for 2 seconds : the hour flashes.
b Press [+] until the required hour is shown (the display of hours takes
account of the 12 /24 hr mode, see paragraph 5 page 32).
2. a Validate the hour by pressing [SEL] : the minutes flash.
b Press [+] until the required minute is displayed. To synchronise your
clock to the nearest second, select the current minute +1 and as the
minute pips, validate by pressing [SEL] ;
The internal second counter is then reset to zero and starts up.
3. a Having validated the minutes : the year flashes.
b Press [+] until the current year is displayed.
4. a Validate the year by pressing [SEL] : the month flashes.
b Press [+] until the required month is displayed.
5. a Press [SEL] to validate the month : the day flashes.
b Press [+] until the chosen day is displayed (Scrolling of the days takes
account of the month and year selected (leap years)).
6. a To conclude time setting, press the [SEL] button.
Caution : At any time by holding down [SEL] then :
pressing [+] quickly, will return you to normal display mode.
pressing [+] for longer (more than 3 seconds), will take you to the configuration menu.
If no buttons are pressed for a period of over 10 minutes, the clock automatically returns to normal
time display mode.
1 Maintaining pressure on the [+] button for longer enables you to increase the values
rapidly (minutes, hours, days, etc).
Reset
Sel.
∞
C
29