Functions; Setting An Alarm - Cooke & Lewis CLPYSTa Mode D'emploi

Time range
0 - 30 minutes
35 minutes - 9 hours
5. Rotate the F2 control to adjust the cooking temperature once cooking begins. Press " " to
confirm and there is an audible beep. If " " is not pressed within three seconds, the oven will
continue cooking with the previous cooking temperature. A countdown bar of 10 remaining steps
is shown in the display.

Functions

Grill function
Other functions
6. After cooking is completed the oven will beep for 5 seconds and then enter standby.
04

Setting an alarm

You can set a timer from 1 minute up to 9 hours 59 minutes.
Note: this function can only be used when the oven is in standby.
1. Press " " to enter alarm mode. A clock icon is displayed and the hour digits flash on the display.
2. Rotate the F2 control to select the hour digits (0-9).
3. Press " " to confirm. The minute digits start to flash.
4. Rotate the F2 control to select the minute digits (0-59).
5. Press " " to confirm. The alarm reminder is set and starts countdown.
6. When the set time is expired, the oven beeps for 10 seconds. Press any button to stop the alarm.
Note: Press the pause button " " once to cancel the reminder during setting, and twice to cancel
once it has been set.
Programming an automatic start time
05
This function is used to set the automatic start time of the oven. Before using this function,
ensure that:
• The food is placed in the oven.
• The clock is set.
Time increment
1 minute
5 minutes
Temperature increment
30ºC
5ºC
43