Contraindications; Troubleshooting; Storage | Care - Casada POWERBOARD 3.0 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 17

Contraindications

Especially in the frequency range from 15Hz!
acute migraine
recent implants, e.g. hip or knee replacement
recent fractures
gallstones / kidney stones
phlebitis, thrombosis
epilepsy
tumours and metastases, bone cancer
acute inflammation
acute illness
pacemaker
pregnancy
severe osteoporosis with fractures caused by osteoporosis
severe diabetes with severe circulatory disorder (gangrene, retina)
metal or ceramic implants less than 6 months old in the areas of the body being trained
fresh wounds and surgeries
stents and bypasses less than 6 months ago
untreated high blood pressure
severe heart failure per NYHA > class I
recent fractures
hernias
Possible side effects of the vibration training
tingling in muscles
itching of skin
increased pain due to too high training intensity
temporary drop in blood pressure
short-term hypoglycaemia
Should the contraindications be viewed as absolute?
If you are affected by one of the contraindications listed above, it does not mean that you are ab-
solutely forbidden to do vibration training. In this case, we recommend you consult your physician.
The vibration platform can be used in addition to your usual therapy if this is recommended by your
physician or a physiotherapist.
28

Troubleshooting

MALFUNCTION
• Check that the batteries are inserted correctly.
The remote control does not
work.
• Change the batteries.
• Check the connection of the electricity cable to the power outlet
and the connection at the device.
The device shows no
functions.
• Attempt to activate the device using the remote control and the
power switch on the device.
The device independently
• Switch the device off, disconnect from the mains, and wait for
performs functions that were
20 seconds. Reconnect the device and switch the device back
not selected (exception:
on (Restart for malfunction).
automatic programmes).
Signal interference.
• There are too many sources of interference nearby, for your
PowerBoard and pulse sensor, to work properly. Change your
position and rescan for a signal.
ATTENTION!
Electromagnetic blocks may cause signal interference. These can occur around high-voltage power
lines, traffic light signals, overhead wiring for electric railways, buses or trams, televisions, car
engines, bicycle computers, some motorised exercise equipment, mobiles, or when passing electric
safety gates. This will repeatedly result in inaccurate heart rate measurements.
Should any malfunctions not be remedied by the above-mentioned solutions or should other prob-
lems arise, please contact your Casada partner to receive professional and individual advice and
solutions for the problem at hand. Your Casada partner will be glad to help you solve any malfunc-
tions fast and professionally.

Storage | Care

Regular care will extend the life of your PowerBoard 3.0 whilst also ensuring safe operation at all times.
1. Recommended storage: dry, free of dust. Please wind cord.
2. Keep liquids and open fire away from the PowerBoard 3.0.
3. Clean the equipment using a dry, soft cloth.
4. Always unplug the PowerBoard 3.0 when not in use.
SOLUTION
29

Publicité

Table des Matières
loading

Table des Matières