Display; Remote Control - Casada POWERBOARD 3.0 Mode D'emploi

Display

[3/4]
[1] START|STOPP Start/Stop the programme.
[2] MODE You can select various settings using this button:
Manual programme (individual)
•
Automatic programme (preset: 1 – Warm-Up, 2 – Refresh, 3 – Interval)
•
Time mode (1–15 minutes)
•
Speed and time cannot be altered in an automatic programme. These are preset.
[3] + / – You can set the running time in time mode with these buttons (1–15 minutes).
[4] SPEED + / – You can regulate the speed in manual mode using these buttons (Level 1 – 99).
[5] Current calorie consumption.
[6] Remaining time. If the TIME display flashes, you are using the time mode.
[7] Current speed level.
[8] Shows the selected mode. If the
gramme. If the MANUAL display flashes, you are using a manual programme.
[9] It shows the current heart rate in combination with the pulse sensor.
22
[5] [9]
[6] [7] [8]
AUTO display flashes, you are using an automatic pro-

Remote control

[1]
[2]
[4]
[2]
1|
ON|OFF
For switching the PowerBoard 3.0 on and off.
2|
MODE
You can select various settings using this button:
• Manual programme (individual)
• Automatic programme (preset: 1 – Warm-Up, 2 – Refresh, 3 – Interval)
• Time mode (1 – 15 minutes)
Speed and time cannot be altered in an automatic programme. These are preset.
3|
START|STOPP
Here you can start or stop the programme.
4|
SPEED
+ / –
You can regulate the speed in manual mode using these buttons (Level 1 – 99).
5|
TIME
(NUR IM MANUELLEN MODUS) + / –
You can set the running time in time mode with these buttons (1 – 15 minutes).
[1]
[5]
[3]
23