Locating Malfunctions Of Flexible Shaft And Pokers; Instructions To Order Spare Parts; Instructions To Request Warranties - Enarco ENAR AVMU Manuel D'instructions

12 LOCATING MALFUNCTIONS OF FLEXIBLE SHAFT AND POKERS

PROBLEM
The motor works overload
and overheats
Bearing failure

13 INSTRUCTIONS TO ORDER SPARE PARTS

en
13.1 INSTRUCTIONS TO ORDER SPARE PARTS
1.All spare parts request must include PART CODE NUMBER AS STATED IN THE PART LIST. We
recommend to include ITEM´S MANUFACTURE NUMBER.
2.The identification plate with manufacture and model number is located in the top part of the
motor`s plastic frame. The transmission and pokers have the manufacture number engraved outside.
3.Let us to know the correct shipping instructions, including the wished route and the address and
consignee`s complete name.

13.2 INSTRUCTIONS TO REQUEST WARRANTIES

1.- The warranty is valid for 1 year after the purchasing of the machine, the warranty will cover parts
with manufacturing defects. The warranty will not cover any malfunction due to an improper
usage of the equipment.
2.- In all warranty requests THE MACHINE MUST BE SENT TO ENARCO, S.A. or to an
AUTHORIZED DEALER, always including the complete address and name of the consignee.
3.- The Technical Assistance Service will immediately notify to the customer if the warranty is
accepted and, if requested, it will send a technical report.
4.- The warranty will be void if any equipment has been previously handled by personnel outside of
ENARCO, S.A. or not authorized by it.
NB: ENARCO, S.A., reserves the right to modify any part of this manual without prior notice.
AX25, AX32, AX40, AX48, AX58 - AVMU
12
TAX1m, TAX1-5m, TAX2m, TAX3m, TAX4m, TAX5m, TAX6m -
1.- Head is overlubricated.
2.- Too much grease in shaft or too little.
3.- Failure of seal and the transmission grease have gone into the head or the head oil
have gone out.
4.- Head movement is restricted.
5.- Transmission with extreme bents.
6.- Transmission in bad condition, broken hose.
1.- Not enough oil in the head.
2.- The head has been working out of the concrete during a long time.
3.- Water has penetrated the head.
4.- The housing has received strong stroke.
AVMU MOTOR - FLEXIBLE SHAFT AND POKERS
CAUSE/SOLUTION