Inspection; Storage; Transportation; Maintenance Of The Vibrating Pokers - Enarco AFE 2000 P Manuel D'instructions

4.7 INSPECTION

1. Before starting the job, check the correct working of all handling and safety devices
2. Inspect regularly the good conditions of the feeding cables.
3. Inspect regularly the connection voltage.
4. When defects are found that jeopardize safe handling, work must be suspended and the
corresponding maintenance carried out.
5. The converter should only be used in conjunction with all safety elements.
6. If defects are found in the safety devices or other defects which could reduce the safe handling of
the equipment, notify immediately the proper responsible person.

4.8 STORAGE

When the converter has not been used for long periods of time, it should always be stored in clean,
dry, and protected areas.

4.9 TRANSPORTATION

When transporting by vehicles, ensure the converter is safe against slipping, overturning and blows.

4.10 MAINTENANCE OF THE VIBRATING POKERS

See instruction manual of the high frequency vibrating pokers (AF_x_mu_01).
5

LOCATING MALFUNCTIONS

5.1 ELECTRIC CONVERTERS

PROBLEM
The converter is not working....................................................See if it has power
FRECUENCY CONVERTERS
AFG, AFD, AFE
Change the motor oil (first 20 hours), clean the sparking plugs and the air filter.
3. Monthly (200 hours).
Clean the oil filter, clean and adjust the sparks plugs.
4. Every 500 hours.
Clean and set the carburettor, clean the cylinders' head, set the valves.
5. Always use original parts by every maintenance operation.
6. The safety fittings have to be checked after every maintenance.
7. The screed has to be sent to an authorized workshop for service every 12 months
or more frequently according to the intensity of the usage.
8. Do not fill the petrol reservoir while smoking or near any other potential source of
danger.
Lock the petrol admission key when filling, use unleaded gas, clean the gas spelt.
9. See the motors' manual to set the motors' speed, starting and stopping.
CAUSE/SOLUTION
Plug in need of repair
Defective switch
en
11