Alarm Messages - Pentair SIATA SFE-EV PRO Manuel D'utilisation

7.1 Alarm messages

During operation of the module, the following error messages may be displayed:
Inhibit signal: there is an inhibit signal input. The following screen alternates with the service screen in the
display. Any incoming regeneration is blocked
Inhibit
Salt alarm: no more salt in the brine tank. Fill the brine tank with salt and press any of the controller buttons.
During the salt alarm, regenerations are not carried out.
Salt Alarm
Technical service request. Active at regular intervals (in weeks) that may be set by after-sales service. The
alarm is deactivated by pressing any of the controller buttons.
Page 28