Display - Pentair SIATA SFE-EV PRO Manuel D'utilisation

Up arrow

4.3 Display

1. Days of the week (1 – Monday, 2 – Tuesday, 3 – Wednesday, 4 – Thursday, 5 – Friday, 6 – Saturday, 7
Sunday);
2. Timer/treated water volume, display of programming parameters;
3. Animated graphic gauge of the current water consumption and of the remaining treatable volume
4. Low-salt alarm indication
5. Area for customer's custom logo*
6. Maintenance request icon
7. Regeneration icon
8. Battery operation icon
9. Column A or B state (only in Duplex setting)
*Notes: The customer's logo may be included on the display if requested by the customer, contact Pentair
Water for further information.
The LCD display used on the board is used to display a set of operating data.
Used to change value on the display during programming. If pressed
together with the down arrow for 5 seconds, accesses the intermediate
settings menu. If pressed together with regeneration button for 5 seconds
in basic service display mode, accesses the advanced settings menu.
When pressed together with the up arrow in a programming menu, allow
you to modify the password of the menu.
Table 2 : SFE EV PRO Keypad Description
Page 7