Pentair SIATA SFE-EV PRO Manuel D'utilisation page 19

Duration of the 7th regeneration step in minutes.
The option is displayed only for Custom system type and if Camshaft
Stop Number is set to nS=7
Duration of the 8th regeneration step in minutes.
The option is displayed only for Custom system type and if Camshaft
Stop Number is set to nS=8
Duration of the 9th regeneration step in minutes.
The option is displayed only for Custom system type and if Camshaft
Stop Number is set to nS=9
Duration of the first regeneration step in minutes.
Letter "B" appears only for duplex system(St=0) to indicates the value for
column B.
Duration of the second regeneration step in minutes.
Letter "B" appears only for duplex system (St=0) to indicates the value for
column B.
Duration of the third regeneration step in minutes.
Letter "B" appears only for duplex system (St=0) to indicates the value for
column B.
Duration of the fourth regeneration step in minutes.
Letter "B" appears only for duplex system(St=0) to indicates the value for
column B.
Prescaler flag (free/preset).
Press and buttons to change. 0=prescaler free, 1=prescaler
with programmed values
The option is displayed only if SH: 1 or SH: 2.
Prescaler free for volumetric sensor. Set value (default equal to 14,
applies to SIATA turbine with only one magnet). Press
buttons to change.
The option is displayed only if FP: 0
Page 19
Off
Off
Off
10
30
20
10
0
and
14.0
Off-99
Off-99
Off-99
Off-99
Off-99
Off-99
Off-99
0-1
00-99.9