Pentair SIATA SFE-EV PRO Manuel D'utilisation page 18

Resin volume. Select resin volume expressed in liters. To modify the
value, use the keys.
Letter "A" appears only for duplex system(St=0) to indicates the value for
column A.
The option is displayed only if SH:1 or SH: 2 and St=0.
Resin volume. Select resin volume expressed in liters. To modify the
value, use keys.
Letter "B" appears only for duplex system to indicates the value for
column B.
The option is displayed only if SH:1 or SH: 2 and St=0.
T Treatable Water. The number(if the unit is Liters) may be set to a
maximum of 2 fields, each consisting of 4 digits. The number lit on the
upper part of display identifies the current field. Press the button
change the number or to go to the next number, press the
button for 5 seconds to program the next 4 digits. If the unit is M3 the
maximum value is 999.9 . Press and release
The option is displayed only if SH:1 or SH: 2 and St=1.
Reserve Management. 0= Fix Reserve
1= Dynamic Reserve (calculated considering the consumptions of the
previous weeks)
The option is displayed only if SH:1
Reserve Volume.
Value of reserve volume expressed in %. It appears only if the Reserve
Management is set to fix (rM=0).
The option is displayed only if SH:1
Duration of the 1th regeneration step in minutes.
Letter "A" appears only for duplex system (St=0) to indicates the value for
column A.
Duration of the 2th regeneration step in minutes.
Letter "A" appears only for duplex system (St=0) to indicates the value for
column A.
Duration of the 3th regeneration step in minutes.
Letter "A" appears only for duplex system (St=0) to indicates the value for
column A.
Duration of the 4th regeneration step in minutes.
Letter "A" appears only for duplex system(St=0) to indicates the value for
column A.
Duration of the 5th regeneration step in minutes.
The option is displayed only for Custom system type and if Camshaft
Stop Number is set to nS=5
Duration of the 6th regeneration step in minutes.
The option is displayed only for Custom system type and if Camshaft
Stop Number is set to nS=6
Page 18
100
100
to
2800
button to confirm.
30
10
30
20
10
Off
Off
0000-
9999
0000-
9999
0-
99999999
0 0-1
Off-50
Off-99
Off-99
Off-99
Off-99
Off-99
Off-99