Pentair SIATA SFE-EV PRO Manuel D'utilisation page 15

The SFE-EV PRO can be configured in three different configuration mode:
P1: Duplex
P2: Simplex
P3: Custom
To change the configuration mode enter the statistics menu holding button for 3 seconds, staying on the
first parameter then press and hold for 3 seconds the button.
The system will ask for the password, then with and buttons choose P1, P2 or P3 mode and
confirm with button:
Duplex system Simplex system Custom system
Choosing system P1 or P2 the procedure ends:
Choosing system P3, set the camshaft's stop number (1 to 9), confirm it with button, then enter the last
3 digits identifying the camshaft and confirm again with button, then the procedure will end:
nS: Stop number S: Camshaft identifyier
After the end of the procedure the system will come back to the previous state.
Camshaft identifyier is provided only for the "on demand" type, during its definition with OEMs.
Page 15