Custom; Operation; Control Panel Description; Buttons - Pentair SIATA SFE-EV PRO Manuel D'utilisation

3.3

CUSTOM

Controller manages a single column system, with a cam on demand. 5 different programming options are
available:
SH0: Time clock on predefined days
SH1: Volumetric delayed
SH2: Volumetric immediate
SH3: High frequency (based upon a programmed time interval)
SH4: Time clock
4

OPERATION

4.1 Control Panel description

4.2 Buttons

Logo Key
Down arrow
Regeneration
Fig. A: Arrangement of keys and displays on the control panel
Description
Used to change value on the display during programming mode, used to
change from a digit to next one when entering passwords.
If pressed together with the up arrow for 5 seconds when in basic
service display mode, accesses the intermediate settings menu.
When pressed together with the up arrow in a programming menu,
allow you to modify the password of the menu.
When pressed individually for 5 seconds during regeneration, will stop
the cycle and trigger a subsequent end cycle search.
When pressed and released, provides access to the basic settings menu.
If pressed for 5 seconds, starts regeneration manually.
During programming, provides access to the next parameter.
If pressed together with the up arrow for 5 seconds, accesses the
advanced settings menu.
In regeneration, press and release to skip current cycle and advance to
next one.
Page 6