Fire-Extinguishing Materials; Commissioning - CLAS EQ 2100 Mode D'emploi

EQ 2100
Electrical and electronic manufacturers and distributors set up proper collection and treatment systems
for these products for this purpose.
Contact your local distributor to obtain information on the collection procedures at the end of the life of
your product.
When purchasing this product, your distributor will also inform you of the possibility to return another end-
of-life piece of equipment free of charge as long as it is of equivalent type and had the same functions as
the purchased product.
Any disposal of the product performed in a different way from that described above will be liable to the
penalties provided for by the national regulations in force in the country where the product is disposed of.
Further measures for environmental protection are recommended: recycling of the internal and external
packaging of the product and proper disposal of used batteries (only if contained in the product).
Your help is crucial in reducing the amount of natural resources used for manufacturing electrical and
electronic equipment, minimise the use of landfills for product disposal and improve the quality of life,
preventing potentially hazardous substances from being released in the environment.

FIRE-EXTINGUISHING MATERIALS

Consult the following table to choose the most suitable fire extinguisher.
Dry materials
Water YES
Foam YES
Powder YES*
CO2 YES*
YES* * can be used if more appropriate fire extinguishing materials are not available or for minor fires.
WARNING
The indications in this table are of a general nature. They are designed as a guideline for the user.
The applications of each type of extinguisher will be illustrated fully by the respective manufacturers on
request.

COMMISSIONING

Assembly:
- When assembling the machine, it is necessary to mount the width grip arm so that it is parallel to the
ground.
- The threaded shaft must be tightened correctly to avoid any tightening problems at the quick nut or
errors when using the machine.
- The machine must be secured to the ground.
Reminder:
- DIS = Offset rod
- LAR = Width rod
- DIA = Diameter rod
- RET = Return
- The calibration and the adjustments of the pins are carried out with a 15 inches steel rim with a tire
mounted on it. The wheel does not need to be balanced.
AUTOMATIC WHEEL BALANCER 3D DIGITAL DISPLAY
+LASER POINTER
79